How to Use the Solar Flare Alert - Green Version
================================================

Assembling the Device
---------------------

Here are all the components of the device:
   .. figure:: ./images/IMG_1751.jpeg
      :width: 80%
      :align: center
      :alt: Wire ring inserted in socket strip

1. Insert the wire ring in the center of the
socket strip and insert the LED into the ping-pong ball.

   .. image:: ./images/IMG_1752.jpeg
      :width: 80%
      :align: center
      :alt: LED placed inside ping-pong ball

2. Plug the cables into the outer plugs of the socket strip.
   Ensure the **black cable is on the left side** when viewed from the perspective of the ESP32.

   .. image:: images/IMG_1753.jpeg
      :width: 80%
      :align: center
      :alt: Cables correctly inserted in socket strip

Make sure the black cable goes to the left side, marked with a black marker

   .. image:: images/IMG_1754.jpeg
      :width: 80%
      :align: center
      :alt: USB cable plugged in

3. Plug in the USB cable to power the device.

   .. image:: images/IMG_1755.jpeg
      :width: 80%
      :align: center
      :alt: Fully assembled Solar Flare Alert device

Your solar flare alert is now physically assembled and ready to connect to the WiFi.

.. include:: wifi_connection.rst